|
|
 |
|
|
 |
| NAME : |
|
| Superflexible Wire Braided |
|
|
|
| MATERIAL
: |
|
CORE
(a)
Electro - galvanised steel
(b) Brass
(c) Copper
(d) Phosphor - bronze
(e) Stainless steel
|
COVERING LAYER
(a) Natural Rubber
(b) Synthetic Rubber
WIRE BRAIDING
(a) Steel
(b) Copper
(c) Tinned Copper
|
|
|
|
| CONSTRUCTION : |
|
| A heavy gauge metallic core with an extruded rubber covering subsequently wire braided upon for reinforcement and added strength. It can withstand temperature up to 210° C. |
|
|
| USES : |
|
| A light in weight pressure hose with superflexibility and high strength. It is suitable for :- |
(a)
|
Suction and pressure lines in hydraulic systems. |
| (b) |
Suction and pressure lines in pneumatic systems. |
| (c) |
Stream lines. |
| (d) |
It is abundantly used by Paper plants, Chemical plants, Petrochemical plants, Fertilizers & Refineries. |
| (e) |
Tyre & moulding presses. |
|
|
| SIZES
: |
|
|
|
|
|
|
|
| NAME : |
|
| Medium Pressure Wire Braided Hose |
|
|
|
| CONSTRUCTION : |
|
INNER CORE : Oil resistant synthetic rubber BUNA - N tube.
REINFORCEMENT : One braid of high tensile steel wire.
COVER : Black heavy rubber cover resistant to oil, weather and abrasion or neoprene cover. |
|
|
|
| APPLICATION : |
|
| Hydraulics, gasoline, air, fuel and lubricating oils. |
|
|
| TEMPERATURE RANGE : |
|
| -40° C to +93° C (-40° F to +200° F ) |
|
|
| SIZES : |
|
|
|
|
|
|
|
| NAME : |
|
| High Pressure Wire Braided Hose |
|
|
|
| CONSTRUCTION : |
|
INNER CORE : Oil resistant synthetic rubber BUNA - N tube.
REINFORCEMENT : Two braids of high tensile steel wire separated by a synthetic rubber layer.
COVER : Black heavy rubber cover resistant to oil, weather and abrasion or neoprene cover. |
|
|
|
| APPLICATION : |
|
| High pressure lines for Hydraulics, oil, fuel, gasoline, air, water, gases and many other fluids. |
|
|
| TEMPERATURE RANGE : |
|
| -40° C to +111° C (-40° F to +210° F) |
|
|
| SIZES : |
|
|
|
|
|
|
|
|
| NAME : |
|
|
|
|
|
| CONSTRUCTION : |
|
INNER CORE : Synthetic heat resistant rubber tube or nylon tube.
REINFORCEMENT : Four spiral plies of heavy duty wire wrapped in opposite directions.
COVER : Black synthetic rubber. |
|
|
|
| APPLICATION : |
|
| Extra high pressure hose for hydraulics, fluids, fuels and lubricating oils under severe temperature and pressure conditions. |
|
|
| TEMPERATURE RANGE : |
|
| -40° C to +93° C (-40° F to +200° F ) |
|
|
| SIZES : |
|
|
|
|
|
|
|
| NAME : |
|
| Teflon Stainless Steel Wire Braided High Pressure Hose |
|
|
| TYPE : |
|
TEFLON HOSES are dependable, unique in performance. They do not fail even in adverse conditions. They have un-limited storage life.
Can withstand temperature from -100° F to +500° F |
|
|
|
| CONSTRUCTION : |
|
INNER CORE : TEFLON - Virgin, PTFE tube of uniform wall thickness.
REINFORCEMENT : One braid of Stainless steel wire.
COVER : Black heavy rubber cover resistant to oil, weather and abrasion or neoprene cover. |
|
|
|
| SIZES : |
|
|
|
|
| APPLICATION : |
|
| A versatile hose with numerous uses for all chemicals, diluted or concentrated acids, alkalies, for highly corrosive gases, solvents for ammonia and brines. Very good hose for steam. |
|
|
| ADVANTAGES OF TEFLON HOSE OVER OTHER HOSES : |
|
| (a) |
Teflon hose when wire braided offers flexible hose construction un-matched by any other hose. |
| (b) |
Teflon hose remains flexible at low temperature and it's strength is not affected. At high temperature it's flexibility does not diminish. |
| (c) |
It's co-efficient of friction is very less and there is no pressure drop. |
| (d) |
The most important advantage of Teflon hose is that it does not fail under severe flexing fatigue. |
| (e) |
The properties of Teflon hose do not change in cold and heat zones with age. It's shelf life is un-limited. |
| (f) |
Low maintenance cost during long service life. |
| (g) |
Less production loss. |
|
|
| |
|
|
 |
|
| |
| GENERAL : |
|
| All hoses are manufactured to International Standards viz: DIN, SAE and BSS. The hoses and end fittings are manufactured under strict quality control procedures and marketed only after they withstand the various tests. |
|
|
| RUBBER HOSES : |
|
| The main parts of the rubber hoses consist of : |
| (a) BUNA-N, black oil resistant synthetic rubber tubing, which forms the basis of all rubber hoses. |
| (b) REINFORCEMENT : It is needed to provide lateral and longitudinal strength. High tensile steel or rayon braidings are used for this purpose. |
| (c) COVER : An oil, weather and wear resistant outer synthetic rubber layer is generally used for this purpose. |
|
|
|
| TEFLON HOSES : |
|
| Teflon hoses are uniform in wall thickness and are supplied with stainless steel braiding over the tubings. |
|
|
|
| WARRANTY : |
|
| All hoses are guaranteed for faulty material and interior workmanship. |
|
|
| |
|
|
|
